Peer to Peer (Ad Hoc) setting
Ad Hoc mode can build a peer-to-peer network structure without wireless AP.
Computers configured with a wireless network card can connect with each
other wirelessly through this mode. The network building process for Ad Hoc
wireless LAN is very simple as it leaves out wireless AP. This mode is
suitable for simple and provisional wireless connection requirements.
The operations introduced below will show you how to connect the product
with a computer through Ad Hoc mode.
1. Enter the players' wireless network setting, select “Ad Hoc” and enter.
2. Set the players’ wireless SSID name in the wireless network. You can
edit the name whatever you like. Other computers configured with a
wireless network card can see the SSID name of your product through
searching.
3. Select security modes for your wireless network: Open system or WEP
(Wireless Equivalent Privacy). If you choose open system, other
computers configured with a wireless network card can connect with
your product freely after searching for it. If you choose WEP, you need to
set the shared key (10-25 numbers) and then other computers can
connect with your product after inputting the network key.
4. Set the IP address of your host, making sure that the address will not
conflict with IP addresses of other wireless facilities. When the
mentioned above three settings are finished, press “OK” to save your
setting and start testing. If the connection is successful, an interface
showing network information will be displayed. Then you can check the
set parameters.
5. When the setting of the Ad Hoc wireless network for the product is
finished, you need to start the wireless network function of the computer
which your product shall connect to. This description is for operations
under WINDOWS XP system, operations under other WINDOWS
operating systems are similar to this.
6. Select “My Computer” on the desktop, choose “Management” by clicking
