3. If the connection is tested to be successful, save the setting. Choose the
newly created shortcut to enter. Input username GUEST or EVERYONE
and password, and then you can access to the appointed IP address
and the shared content in that computer.
4. The product can play multimedia documents in the shared content. If
videos are played, the network connection speed will be shown on the
screen. Higher speed indicates that the network is more stable and the
quality of the video will be better.
Wireless Setup (optional, Wifi USB dongle required)
If it is your first time to use the wireless network function, please do the
following setting:
Access your player to the Local Area Network (LAN) and press “Setting” in
the remote control to enter the players' setting interface.
1. Select “Network” and enter "Wireless network setting", choose the file
name of the connecting configuration. Then the clue “Press ‘OK’ in the
remote control to connect, and press ‘OK’ to test the selected
connection” will show on the lower part of the screen. Press “OK” to
connect. There are two connection modes to choose: "AP" and “Ad
Hoc”.
2. If you select “AP” mode, the player can detect wireless signal sources
within the searching scope of the configured wireless network card and
the interface will show all the detected wireless SSID.
3. If you select “Ad Hoc” mode, the player can access to sharable content
in specific objects. For example, the product and computers can connect
and exchange data through choosing “Ad Hoc” mode without using
wireless routers.
4. Connect an USB wireless network card (or dongle) that supports the
802.11 b/g/n protocol to the USB HOST interface of the product. Then
“WIFI PLUG IN” will show on the screen. You can start to set the
products' wireless network settings.
