LBC LCR7W, Installation, Service And Parts Information

Page: 10 / 22

10
INSTALLATION (Part 3 of 5) )
Soap Supply Connection
Connect the soap bottle to the soap inlet. All parts necessary to complete this step are included with the oven. Locate the
tube connector (1/2” NPTM x 1/4” hose barb) and connect it to the oven soap inlet. Secure the tube with a band clamp.
Attach the other end of the tube to the soap bottle cap and secure it with a band clamp.
Oven Body
(Right Side View)
Soap Tube
(included with oven)
Tube Connector
(included with oven)
Bottle Cap
Soap
Band Clamps
(included with oven)
Soap Inlet
NOTE: For low-soap alert to function
properly, the hose must be installed with no
dips or flat lengths. It is strongly
recommended to locate the soap bottle
directly under the oven and route the hose as
vertically as possible.
Flow
Water Supply Connection
Refer to water requirements (volume, pressure, temp, pipe size) outlined in Specifications section. Connect the water
supply to the 3/4” hose fitting located at the water inlet. A flexible water line is recommended if the oven is installed with
a stand. If using a flexible water line, provide sufficient length to allow the oven to be moved for cleaning without applying
tension to the connections.
Water Inlet
Water Supply
Flow
Oven Body
(Right Side View)