19
18
Battery Backup Assembly Instructions
NOTICE:
The performance of the built-in battery backup cannot be guaranteed. If you require continuing
use during a power outage, you should purchase a separate battery backup system. Contact
your La-Z-Boy
®
dealer for more information.
To reduce battery consumption, the massage and heat features are blocked and unavailable
when the battery backup is in use. Additionally, the operating speed is reduced to decrease
energy consumption.
Always maintain constant even pressure on the button when operating on battery backup to
reduce the energy consumption.
The battery backup is located in the power supply and uses two 9-volt alkaline
batteries (not included).
1. Unplug the 120 volt power cord from the electrical outlet, and disconnect the power supply
connector from either the Y-cable connector or motor connector, whichever comes with the product.
2. Depending on the style purchased, the battery compartment is located in either the bottom or side
of the power supply. Locate the battery compartment and slide the battery cover over to access
the battery compartment. Your power supply will look like F
IGURE
1 or F
IGURE
2.
3. Snap the connection caps on the battery terminals. Place the batteries in the power supply.
4. Slide the battery cover(s) over the batteries.
5. Proceed to the
Operating Instructions
.
Power
Supply
(2) 9-Volt
Alkaline Batteries
PowerReclineXR
®
& PowerReclineXRw
™
Supply Specifications:
Input: 100-240V~, AC 50/60 Hz 1.5A
Output: 29V, DC 2A
Battery
Cover
Replace the power supply batteries every six months and after
each power failure use. Under normal conditions, the battery
backup will operate the chair two times, but this performance
cannot be guaranteed.
F
IGURE
1
Power Supply Specifications:
Input: AC 100V-240V~ 50/60Hz, 1.6A
Output: DC 29V 2A
F
IGURE
2
Note: Power supplies vary by style and date of manufacturer.
Power Supply
(2) 9-Volt
Alkaline Batteries
Battery
Cover
(Page intentionally left blank)
