PowerReclineXR
®
with Massage & Heat
Assembly Instructions
F
IGURE
7
F
IGURE
8
F
IGURE
9
F
IGURE
10
6. Align the red heating pad connectors and push the connectors together until locked (F
IGURE
7).
7. Align the brown massage connector with the black massage connector and push the connectors
together until locked (F
IGURE
8).
8. Gently rotate the chair back to the upright position so it is resting on its base. Do not allow the motor
connector to be pinched between the frame and the floor.
9. Connect the power supply to the chair. Align the power supply connector to the motor connector
routed behind the chair (F
IGURE
9). Push the connectors together until fully seated and close the
locking cover to secure the connection.
10. Connect the 120 volt power cord to the power supply (F
IGURE
10). Do not plug in until instructed
in the
Operating Instructions
.
11. Proceed to the
Battery Backup Assembly Instructions
.
12. To remove the back, unplug the 120 volt power cord from the electrical outlet, and disconnect the
power supply connection behind the chair. Reverse the
Assembly Instructions
steps.
Make this
connection
Make this
connection
Make this
connection
120 Volt Power Cord
11
10
Power Supply
Make this
connection
Motor Connector
(Page intentionally left blank)
