A__madi4 User Guide
Version: 10.0.0/4
24/68
11. Device Configuration
11. Device Configuration
The main settings are configured via the
Device configuration
page.
11.1
Opening the Device Configuration Page
1.
Open the
, select
Device configuration
and then click on the graphical preview.
The Device configuration page opens in a new browser tab:
The Network Service Address, Statuses and Software version apply to the complete unit (i.e. to both BRIDGE
modules), while the Interface Mode and RAVENNA Butler shortcut are specific to the connected BRIDGE.
Note that the
Open RAVENNA Butler
option will be greyed out if either there is no interface mode or the mode is
converting to/from RAVENNA Link.
Configuration Tasks
1.
First check, and if necessary update, the
2.
Then select the
When converting to/from RAVENNA Link, the setup is complete and you can connect your RAVENNA Link
device to the
ETHERNET A
port.
When converting to/from RAVENNA Net,
the RAVENNA Web UI to define the IP settings of the streaming
ports, the sync source and sample rate, and the TX/RX streams.
Device Statuses
The Power Supply Units and Fan areas show the status of the two internal power supplies and cooling fan.
At the bottom of the page you will see
Device Ready
when the unit is ready for operation.