Lavor THERMIC 22 H, Instruction Manual - Use And Maintenance

Page: 15 / 40

15
SPECIFICATIONS AND TECHNICAL DATA
CAUTION
• For the engine to reach its maximum power it needs at least 10 hours running-in at a load 15 to 20%
lower than the machine’s maximum performance.
• The engine’s maximum power diminishes as the altitude and ambient temperature at which it is
working increases (there is a drop of about: 3.5% every 305 m/1000 ft above sea level and 1% every
5.6°C/42°F above 16°C/61°F). If the high pressure water cleaner is used at a high altitude or with high
ambient temperature please refer to the engine’s operating and maintenance manual to see if any
precautions need to be taken.
• The declared performance refers to an atmospheric pressure of 1013 hPa at sea level and an ambient
temperature of 16°C/61°F.
• If the high pressure cleaner is not connected to the water mains but takes water from a tank, in certain
conditions the thermostat valve can open and prevent the complete self-priming of the pump. In
these cases, fit a rubber hose into the hose connection of the thermostatic valve and bring the other
end of the hose to the tank from where the pump takes the water.
• The specifications and technical data are approximate. The manufacturer reserves the right to make
all changes to the machine it deems appropriate.
THERMIC
(1)
THERMIC 22 H THERMIC 23 K
5015 4018 3521 5015 4018 3521
MOTORISATION Honda GX 690 Kohler 12KD477/2
Fuel Petrol Diesel fuel
Power (kW - HP) 16,4 – 22,0 17,0 – 22,8
Nominal rotation speed - maximum (RPM) 3400 – 3600 [1560 – 1650
(*)
] 3400 – 3400 [1500 – 1700
(*)
]
(**)
HYDRAULIC CIRCUIT
Maximum supply water temperature (°C - °F) 60 – 140
Minimum supply water temperature (°C - °F) 5 – 41
Minimum supply water flow rate (l/min - USgpm) 21 – 5,5 23 – 6,1 27 – 7,1 21 – 5,5 23 – 6,1 27 – 7,1
Maximum supply water pressure (bar - psi) 8 – 116
Maximum priming depth (m - ft) 0 – 0 0 – 0
PERFORMANCE
Maximum flow rate (l/min - USgpm) 16,5 – 4,4 18 – 4,8 21 – 5,5 16,5 – 4,4 18 – 4,8 21 – 5,5
Nominal flow rate (l/min - USgpm) 15 – 4,0 17,5 – 4,7 20,5 – 5,4 15 – 4,0 17,5 – 4,7 20,5 – 5,4
Maximum pressure (bar - psi) 500 – 7250 400 – 5800 350 – 5075 500 – 7250 400 – 5800 350 – 5075
Nominal pressure (bar - psi) 480 – 6960 385 – 5580 335 – 4850 480 – 6960 385 – 5580 335 – 4850
Maximum reaction force on the spray gun (N) 78 83 91 78 83 91
Sound pressure level - Uncertainty (dB(A)) 89 – 0,7
(3)
89 – 0,7
(2)
89 – 0,7
(3)
89 – 0,7
(2)
Sound power level (dB(A)) 107
(3)
107
(2)
107
(3)
107
(2)
Operator hand-arm vibration - Uncertainty
(m/s 2 )
3,9 – 0,24
(3)
3,9 – 0,24
(2)
3,9 – 0,24
(3)
3,9 – 0,24
(2)
PUMP OIL
15W–40
(4)
15W–40
(4)
GEARBOX OIL
80W–90 –
WEIGHT AND DIMENSIONS
Length x width x height (mm - in) (mm - in) 1185 x 740 x 1020 - 46,65 x 29,13 x 40,16
Weight (kg - lb) 180 - 397 235 - 518
(*)
Gearbox R = 1 : 2,18.
(**) Pulley Belt
(1)
All models have electrical start-up.
(2)
Measurements in agreement with EN 60335-2-79.
(3)
Measurements in agreement with EN 1829-1.
(4)
Also see the corresponding oils table.
The specifications and technical data are approximate. The Manufacturer reserves the right to make all changes to the machine it deems appropriate.
EN
WARNING
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
Read and keep in mind that indicated in the
INSTRUCTION MANUAL - SAFETY WARNINGS.
EN