EN
15
· Unscrew the coupling part for the water inlet.
· Screw the suction hose with filter (not included)
onto the water connection of the unit.
· Hang the filter in the container.
· Vent the unit before operation.
· Unscrew the high-pressure line at the high-
pressure outlet of the unit.
· Switch on the unit and let it run until water free of
bubbles emerges at the high-pressure outlet.
·
Switch off the unit and screw on the high-pressure
hose again.
Failure to comply with the above conditions
causes serious mechanical damage to the
pump and the loss of warranty cover.
>
ELECTRICITY SUPPLY
- The appliance’s electrical connection must
comply with the IEC 60364-1 standard.
IMPORTANT:
Before
connecting
the
BQQMJBODF NBLF TVSF UIBU UIF OBNFQMBUF
data are the same as those of the electrical
mains and that the socket is protected by a
differential security breaker with tripping
sensitivity below 0.03 A - 30 ms.
- If the appliance’s plug is not compatible with
UIF TPDLFU IBWF UIF TPDLFU SFQMBDFE XJUI
another of suitable type by professionally
qualified staff.
- Never use the appliance in ambient
temperatures below 0° C if it is equipped
with a PVC (H VV-F) cable.
E
XY WARNING:
Inadequate extension cords
can be dangerous.
E
XJ WARNING:
*GBOFYUFOTJPODPSEJTVTFE
the plug and socket must be of watertight
construction.
Information for supply may also be obtained
from the plug manufacturer.
<16 A
<25 A
<20 m
NN
2
14 AWG
NN
2
12 AWG
20 m - 50 m
NN
2
12 AWG
NN
2
10 AWG
>
PLUG
HOW TO CONNECT THE CORD TO A U.K. PLUG:
IMPORTANT
The wires in the mains lead are
coloured in accordance with the following code:
Blue
Neutral
Brown
Live
Yellow/Green
Earth
Please read the in-
structions
given
below before con-
necting the cord to a
plug. If in doubt plea-
se consult a qualified
electrician. As the
colours of the wires
in the mains lead of
this appliance may
not correspond with
the coloured mar-
kings identifying the
UFSNJOBMTJOZPVSQMVHQSPDFFEBTGPMMPXT5IFXJSFT
that is coloured Brown must be connected to the
terminal which is marked with the letter L or colou-
red Red. The wire that is coloured Blue must be con-
nected to the terminal wich is marked with the letter
N or coloured Black. Safety points for rewireable or
moulded plug: The mains lead of this appliance may
be already fitted with a BS1363 13A plug.
*GZPVSTPDLFUPVUMFUJTOPUTVJUBCMFGPSUIFQMVH
then the plug must be removed (cut off if it is a
NPVMEFE PO QMVH UIF nFYJCMF DPSE JOTVMBUJPO
should be stripped back as appropriate and a
suitable 3 pin plug fitted.
E
WARNING:
Dispose of a plug that has been cut
GSPN UIF QPXFS TVQQMZ DPSE BT TVDI B QMVH JT
hazardous if inserted in a live 13A socket outlet
elsewhere in the house. - Should the fuse need
UP CF SFQMBDFE BO "45" NBSLFE GVTF BQQSPWFE
UP #4 PG UIF TBNF SBUJOH NVTU CF VTFE
-
Always replace the fuse cover after fitting a fuse.
The plug must NOT be used if the cover is omitted
or lost until a replacement is obtained. - Make
certain that only the correct fuse cover is used
and fitted. - For plugs with detachable fuse cover
the replacement must be the same as the colour
JOTFSUJOUIFCBTFPGUIFQMVHPSBTEJSFDUFECZUIF
embossed wording on the base of the plug. - If
the detachable fuse cover is lost a replacement
may be purchased from a Service Centre.
( if fitted)
NOTE:
"VUPNBUJD4UPQ4ZTUFNXIJDI
stops the machine during the bypass phase. To
TUBSUUIFXBUFSDMFBOFSJUJTUIFSFGPSFOFDFTTBSZUP
set the switch on position (I)“ON”; after that press
the pistol trigger: the Automatic Stop System will
start the machine and will stop it automatically
when the trigger is released. It is advisable to
