Temperature adjustment
Adjust the temperature by means of the thermoregulator situated on the control panel.
This machine is equipped with an electronic thermoregulator to check and adjust the boiler temperature (=pressure) from min. 3 BAR to
max. 10 BAR.
Press P on the thermoregulator to modify the temperature, then press to increase it and to decrease it.
In order to work at 10 BAR, if the temperature on the thermoregulator has been
varied, it is necessary to set the thermoregulator at 180
°
C.
Adjustment of the quantity of steam and detergent
Adjust the quantity of steam and detergent by means of the two knobs situated on the machine left side:
- The left knob varies the quantity of steam by turning it clockwise or counter-clockwise
- The right knob varies the quantity of detergent by turning it clockwise or counter-clockwise
The machine is pre-set at the max temperature of 180
°
C.
- For any adjustment, timing or replacement intervention not described in this handbook, contact the Builder or the Reseller qualified
personnel.
- It is possible to make various adjustments to adapt the machine to the various production needs.
WARNINGS
COMPARATIVE TABLE OF
DEGREES CENTIGRADE AND
STEAM PRESSURE EXPRESSED
IN BAR
°
C
BAR
133,91
3
144,00
4
152,22
5
159,22
6
165,34
7
170,81
8
175,77
9
180,31
10
thermoregulator
Steam
adjustment
Detergent
adjustment
