LaView LV-D1104CW SERIES, User Manual

Page: 25 / 152

User Manual of LV-D1104CW,LV-D1108CW, LV-D1116CW Series DVR
24
Auto-switch .
Start Recording Start all-day normal recording or motion detection recording for all channels.
Quick Set Set the video output mode to Standard, Bright, Gentle or Vivid.
All-day Playback Play back the video of the selected channel.
Aux Monitor Switch to the auxiliary output mode and the operation for the main output is disabled.
Note: If you enter Aux monitor mode and the Aux monitor is not connected, the mouse
operation is disabled; you need to switch back to the Main output with VOIP/MON
button on IR remote control and then press the Enter button.
Note: If the corresponding camera supports intelligent function, the Reboot Intelligence option is included
when right-clicking mouse on this camera.
3.2.2 Quick Setting Toolbar in Live View Mode
On the screen of each channel, there is a quick setting toolbar which shows when you right-click mouse on the
camera.
Figure 3.2 Quick Settings Toolbar
Table 3.3 Description of Quick Setting Toolbar Icons
Icons Description Icons Description Icons Description
Enable/Disable
Manual Record
Instant
Playback
/
Mute/Audio on
PTZ Control Digital Zoom Image Settings
Close
Instant Playback
Instant Playback only shows the record in last five minutes. If no record is found, it means there is no
record during the last five minutes.
Digital Zoom
Digital Zoom can zoom in the selected area to the full screen. You can left-click and draw to select the
area for zooming in, as shown in Figure 3.3.