LaView LV-D1104CW SERIES User Manual Download

Page: 137 / 152

User Manual of LV-D1104CW,LV-D1108CW, LV-D1116CW Series DVR

136

12.4

Upgrading System

Purpose:

The firmware on your device can be upgraded by local backup device or remote FTP server.

12.4.1 Upgrading by Local Backup Device

Steps:

Connect your device with a local backup device where the update firmware file is located.

Enter the Upgrade interface.

Menu > Maintenance > Upgrade

Click the

Local Upgrade

tab to enter the local upgrade menu.

Figure 12.12 Local Upgrade Interface

Select the update file from the backup device.

Click the

Upgrade

button to start upgrading.

After the upgrading is complete, reboot the device to activate the new firmware.

12.4.2 Upgrading by FTP

Before you start:

Configure PC (running FTP server) and device to the same Local Area Network. Run the 3

-party TFTP software

on the PC and copy the firmware into the root directory of TFTP.

Steps:

Enter the Upgrade interface.

Menu > Maintenance > Upgrade

Click the

FTP

tab to enter the local upgrade interface.

Summary of Contents for LV-D1104CW SERIES

























































































































































Search results

Summary of Contents for LV-D1104CW SERIES

Reviews:

Related manuals for LV-D1104CW SERIES

Brands by name

Popular brands

LaView LV-D1104CW SERIES, User Manual

Search results

Summary of Contents for LV-D1104CW SERIES

Reviews:

Related manuals for LV-D1104CW SERIES

Brands by name

Popular brands