LaView LV-D1104CW SERIES User Manual Download

Page: 107 / 152

User Manual of LV-D1104CW,LV-D1108CW, LV-D1116CW Series DVR

106

Select Receivers:

Select the receiver. Up to 3 receivers can be configured.

Receiver:

The name of user to be notified.

Receiver’s Address:

The Email address of user to be notified.

Enable Attached Pictures:

Check the checkbox of

Enable Attached Picture

if you want to send

email with attached alarm images.

Interval:

The interval refers to the time between two actions of sending attached pictures.

Figure 9.24 Configure Email Settings

Click the

Apply

button to save the Email settings.

You can click the

Test

button to test whether your Email settings work. The corresponding Attention

message box will pop up.

Figure 9.25 Email Testing Attention

Summary of Contents for LV-D1104CW SERIES

























































































































































Search results

Summary of Contents for LV-D1104CW SERIES

Reviews:

Related manuals for LV-D1104CW SERIES

Brands by name

Popular brands

LaView LV-D1104CW SERIES, User Manual

Search results

Summary of Contents for LV-D1104CW SERIES

Reviews:

Related manuals for LV-D1104CW SERIES

Brands by name

Popular brands