LaView LV-D1104CW SERIES, User Manual

Page: 145 / 152

User Manual of LV-D1104CW,LV-D1108CW, LV-D1116CW Series DVR
144
4. Click the OK button to save the settings and go back to the User Management interface. The added new
user will be displayed on the list, as shown in Figure 13.6.
Figure 13.6 Added User Listed in User Management Interface
5. Select the user from the list and then click the button to enter the Permission settings interface.
Figure 13.7 User Permission Settings Interface
6. Set the operating permission of Local Configuration, Remote Configuration and Camera Configuration for
the user.
Local Configuration
•
Local Log Search: Searching and viewing logs and system information of device.
•
Local Parameters Settings: Configuring parameters, restoring factory default parameters and
importing/exporting configuration files.
•
Local Advanced Operation: Operating HDD management (initializing HDD, setting HDD
property), upgrading system firmware, clearing I/O alarm output.
•
Local Shutdown /Reboot: Shutting down or rebooting the device.
Remote Configuration
•
Remote Log Search: Remotely viewing logs that are saved on the device.
•
Remote Parameters Settings: Remotely configuring parameters, restoring factory default
parameters and importing/exporting configuration files.
•
Remote Serial Port Control: Configuring settings for RS-485 ports.
•
Remote Video Output Control: Sending remote control panel signal.
•
Two-Way Audio: Realizing two-way radio between the remote client and the device.
•
Remote Alarm Control: Remotely arming (notify alarm and exception message to the remote
client) and controlling the alarm output.
•
Remote Advanced Operation: Remotely operating HDD management (initializing HDD, setting
HDD property), upgrading system firmware, clearing I/O alarm output.
•
Remote Shutdown/Reboot: Remotely shutting down or rebooting the device.
Camera Configuration