19
EN
PROGRAMMING
➤
Programming button
➤
Programming prices
➤
Programming coins
➤
Programming temperature
➤
Programming miscellaneous
➤
Diagnostics
➤
Sales audit data
➤
Programming clock
➤
Registration out of service
➤
Product decounter
➤
Programming maintenance
➤
Programming grams - seconds
➤
PROGRAMMING KEY
Press key “2” when the display shows “key n” to
scroll the variables composing the function of that
key (by pressing keys “3” and “7”).
• If you press “2” when “DISABLED”, the key will
be inhibited and it will perform no function.
• If you press “2” when “ENABLED”, the key will
perform the function you have programmed
(dispensing cycle of a drink).
Use key “2” to scroll the following items:
The first programmable parameter for each selection
button is coffee in capsules. The following two varia-
bles are available:
• the water quantity in the cup; change it by means
of “3” and “7”. If the variable is zero, no espresso will
be dispensed (drink composed by instant products
only);
• coffee will be dispensed before (value 1) or after
(value 0) instant products.
If this option is enabled, after the capsule has been
drilled, the pump will dispense a small water quan-
tity for one second, it stops for the seconds set up
here (from 01 to 15) and it resumes the usual dis-
pensing cycle.
COFFEE DOSE
CC:
00
COFFEE SEQUENCE
FIRST=1
Scrolling with “2” you can change the product pa-
rameters.
Press keys “3” and “7” to change the rotation time
of the N product motor, thus changing the prod-
uct quantity you have dispensed. If time is zero, no
product N will be dispensed.
If the time you have programmed is other than zero,
the N product motor will be activated at the expiry
of the delay time you have programmed; the delay
time is increased or decreased by pressing keys “3”
and “7”.
The rotation time of the product motor can be
briefly interrupted one or two times during the dis-
pensing cycle (0 = no break). Maximum two breaks
are possible, increased or decreased by pressing
keys “3” and “7”;
To determine the solenoid valve opening time and
then the water quantity it will deliver. You can carry
out a “time test” on the setpoint.
Water will be dispensed in the mixing bowls at the
expiry of the delay time you have programmed.
The rotation time of the mixer fan can be changed
by pressing keys “3” and “7”. If time is equal to zero,
the mixer will not rotate.
PRODUCT
N
SECONDS:
0.0
BREAKS NUMBER
0
WATER TIME
N
0=DISABLED
0.0
START DELAY
WATER N
0.0
START DELAY
PRODUCT N
0.0
PREINFUSION PAUSE
0.0
MIXER
N
0=DISAB.
0.0
Summary of Contents for Magystra LB 2600 INT
Page 2: ......
Page 28: ...28 EN PROGRAMMING...
Page 29: ...29 EN PARAMETERS Small Medium Large...
Page 43: ......
