LAVAZZA Magystra LB 2600 INT, Installation And Maintenance Manual

Page: 22 / 44

22
EN
➤
PROGRAMMING MISCELLANEOUS
The “miscellaneous” item includes some options
(press keys “3” and “7” to modify the values of these
options).
Machine code A and B: you can number the ma-
chine to distinguish it from others similar (data col-
lection).
Fan time: to determine for how many minutes after
the latest dispensing cycle the powder suction fan
will remain active.
Beep time active at the end of each machine func-
tion.
Number of decimals: to determine how many deci-
mals are considered in the comparison between the
selection price and the credit you have inserted.
Language: to display the messages in the languages
made available.
MACHINE ID
A 00
MACHINE ID
B 00
FAN TIME
MIN. 00
BEEP TIME
0.0
DECIMALS NUMBER
0
LANGUAGE:
ENGLISH 00
Activating the pump and the brewing solenoid
valve for a time set up here for three times.
Each activation will last one third of the programmed
value, suspended by two-second breaks.
It sets up after how many minutes after the last se-
lection the machine must switch in standby mode,
i.e. it will reduce the thermoblock water temperature
to the value set up in the following parameter. Dur-
ing the energy saving phase, the vending machine
will alternatively display the initial message and the
warning message that the “energy saving” function
is active.
Programme the thermoblock water temperature
during the “energy saving” phase; the first drink,
whose request has been made during the “energy
saving” phase, will be dispensed some seconds later
to enable the vending machine to achieve the op-
erating temperature, as it is shown by the display.
DISPENSING WATER
TIME: 0.0
DELAY ENERGY
SAVING: MIN 00
TEMPERATURE ENERGY
SAVING: 00
PROGRAMMING
pump / ev
stop
seconds
seconds