LAVAZZA Cap100US, Instructions For Installation And Use Manual

Page: 8 / 112

• • 8
75 667
296 296
80
288
183
70
F. 5
A
B
B
B
B
F. 7
G
F
H
I
F. 6
C
D
E
H
10 - INSTALLATION
10.1 Notes on location
The machine must be installed in a dry and sheltered area, with:
- ambient temperature: +10° C + 25° C
- maximum humidity: 65%.
10.2 Machine positioning
IMPORTANT
Check that the installation surface is large and solid enough to
support the machine safely.
Make a Ø 100 mm hole ( A - F. 5) on the supporting surface.
Place the machine in a steady position on the supporting surface (the
circles
B – F. 5 indicate the optimal position of the adjustable feet).
Level the machine using the adjustable feet ( F – F. 7).
10.3 Water connection
WARNING
Water and waste connections shall complhy with applicable
federal states, or local codes.
WARNING
Water hardness should never be above 8°F.
It is essential to supply the machine with water treated by a descaling
device, which guarantees compliance with the abovementioned limita-
tions. Make sure the water network provides drinking water, with pressu-
re ranging between 1 and 8 Bars.
- Connect the purifier ( C ) to the water network ( D ).
IMPORTANT
Before connecting the purifier to the machine, perform a washing
cycle until the water is clear; then proceed with the connection
of the purifier to the machine.
C – PURIFIER
D – WATER NETWORK
E - DRAIN CHANNEL
Connect a drain hose to the coupling ( H – F. 7) and fasten it using the
hose clamp.
Using only using a hose and couplings made of “food-safe” materials,
connect the machine to the drinking water network, by means of the
coupling (
I – F. 7).
Insert the outlet and filling pipes into the hole A .
WARNING /IMPORTANT
For a correct and ergonomic use of the machine, it is
recommended to install it onto a surface which is at least 1 m
high.