Maintenance manual for technical assistance
7
Manual code 10081945 / Rel. 0.00 / February 2014
Unscrew the six screws and detach
the rear panel (5).
Extract the tank coupling (6) and
completely remove the rear panel
(5).
Unscrew the screw shown in the fi-
gure and remove the right-hand
frame (7).
Carry out the same operation for the
left-had frame.
Release and remove the cover (8).
Unscrew the screw shown on the
machine top.
Unscrew the screw shown on the
bottom of the machine and remove
the electronic board cover (9).
Disconnect the connector from the
electronic board as shown in the fi-
gure.
Remove the top cover by means of
the tab (10) as shown in the figure.
A
7
5
5
6
A
8
A
9
10