Configuring Ether Link network settings using a web browser
To set an Ether Link's network settings using a web browser, open
the browser and
enter the IP address
of the Ether Link into
the browser's location
bar. The embedded
web server running
on the Ether Link will
display the opening
screen of the Ether-
Serial Link
configuration menu.
Choose the setting
you wish to change.
In the configuration screen that appears, enter the network settings
you wish for that Ether Link. Once the new values are entered and
accepted, the Ether-Serial Link will reboot to implement the new
network settings.
Changes made using a web browser will be updated to the Ether
Link but not to the local PC.
Changing the network settings of an Ether Link device may
make that device unavailable to other stations that have activated
a connection to that device using older network settings.
NOTE:
7