C6000 Debugger | 38
©
1989-2022
Lauterbach
AMBA trace bus DSP Trace Formatter (ADTF) - Texas Instruments
Module of a TMS320C5x or TMS320C6x core converting program and data trace information in ARM
CoreSight compliant format.
CMI.Base
<address>
CMI.RESet
CMI.TraceID
<id>
Clock Management Instrumentation (CMI) - Texas Instruments
Trace source delivering information about clock status and events to a system trace module.
DRM.Base
<address>
DRM.RESet
Debug Resource Manager (DRM) - Texas Instruments
It will be used to prepare chip pins for trace output.
EPM.Base
<address>
EPM.RESet
Emulation Pin Manager (EPM) - Texas Instruments
It will be used to prepare chip pins for trace output.
ETB.ATBSource
<source>
ETB.Base
<address>
ETB.RESet
ETB.Size
<size>
Embedded Trace Buffer (ETB) - ARM CoreSight module
Enables trace to be stored in a dedicated SRAM. The trace data will be read out through the debug port after
the capturing has finished.
FUNNEL.ATBSource
<sourcelist>
FUNNEL.Base
<address>
FUNNEL.Name
<string>
FUNNEL.PROGrammable
[
ON
|
OFF
]
FUNNEL.RESet
CoreSight Trace Funnel (CSTF) - ARM CoreSight module
Combines multiple trace sources onto a single trace bus (ATB = AMBA Trace Bus).
REP.ATBSource
<sourcelist>
REP.Base
<address>
REP.Name
<string>
REP.RESet
CoreSight Replicator - ARM CoreSight module
This command group is used to configure ARM Coresight Replicators with programming interface. After the
Replicator(s) have been defined by the base address and optional names the ATB sources REPlicatorA and
REPlicatorB can be used from other ATB sinks to connect to output A or B to the Replicator.
OCP.Base
<address>
OCP.RESet
OCP.TraceID
<id>
OCP.Type
<type>
Open Core Protocol watchpoint unit (OCP) - Texas Instruments
Trace source module delivering bus trace information to a system trace module.
