C6000 Debugger | 55
©
1989-2022
Lauterbach
This option controls the SYSPWRUPREQ bit of the CTRL/STAT register of the Debug Access Port (DAP)
during and after the debug session
SYStem.Option.DUALPORT
Implicitly use run-time memory access
All TRACE32 windows that display memory are updated while the processor is executing code (e.g.
). This setting has no effect if
is disabled.
If only selected memory windows should update their content during runtime, leave
SYStem.Option.DUALPORT OFF
and use the access class prefix
E
or the format option
%E
for the
specific windows.
SYStem.Option.EnReset
Allow the debugger to drive nRESET (nSRST)
[
window> EnReset
]
Default: ON.
If this option is disabled the debugger will never drive the nRESET (nSRST) line on the JTAG connector. This
is necessary if nRESET (nSRST) is no open collector or tristate signal.
From the view of the core, it is not necessary that nRESET (nSRST) becomes active at the start of a debug
session (
), but there may be other logic on the target which requires a reset.
AlwaysON
System power is requested by the debugger on a debug session start,
and the control bit is set to 1.
The system power is
not
released at the end of the debug session, and
the control bit remains at 1.
ON
System power is requested by the debugger on a debug session start,
and the control bit is set to 1.
The system power is released at the end of the debug session, and the
control bit is set to 0.
OFF
System power is
not
requested by the debugger on a debug session
start, and the control bit is set to 0.
Format:
SYStem.Option.DUALPORT
[
ON
|
OFF
]
Format:
SYStem.Option.EnReset
[
ON
|
OFF
]