- 11 -
ALARMS Key.
Pressing
ALARMS
once displays the setpoint for Alarm 1. Pressing it
again displays the setpoint for Alarm 2. Pressing it again returns to the present value.
KEYS IN MENU MODE
Right Arrow Key (MENU).
Pressing
steps the meter through all menu items that
have been enabled and then back to the Run Mode. With the DC signal conditioner board
and no option boards, available menu items are
_
InPut
,
SEtuP
,
ConFG
,
_
FiLtr
,
dEc.Pt
,
SCALE
,
OFFst
,
Loc 1
,
Loc 2
,
Loc 3
. If a change has been made to a menu item, that
change is saved to non-volatile memory when the
key is pressed next, and
StoreE
is
displayed briefly.
To return the meter to the run mode after
StoreE
has been displayed, you can press the
key repeatedly to step through all top-level menu selections until
rESEt
is displayed
briefly. As a shortcut, to return to the run mode after
StoreE
has been displayed, you can
press then
simultaneously. Again,
rESEt
will be displayed briefly.
Right Triangle Key (Digit Select).
•
Pressing from the
InPut
menu brings up all meter functions available with the meter's
signal conditioner. For example, for the DC signal conditioner board, these are
_
dC U
,
_
dC A
and
_
rAtio
.
•
Pressing from the
SEtuP
,
ConfFG
,
FiLtr
,
SCALE, OFFSt
,
Loc 1
,
Loc 2
or
Loc 3
menus items sequentially selects digit positions 1 - 5, as indicated by a flashing digit:
0
0000
,
0
0
000
,
00
0
00
,
000
0
0
,
0000
0
.
•
Pressing from the
dEC.Pt
menu item sequentially selects decimal point positions,
which will flash:
d
.
dddd
dd
.
ddd
ddd
.
dd dddd
.
d
ddddd
.
.
ddddd
.
Up Triangle Key (Value Select).
Pressing for a flashing item (digit position or decimal
point position) will increment that item. Pressing
will save any changes, and
StoreE
is displayed briefly.
Left Arrow Key (Reverse Menu).
Pressing
has the same effect as pressing
,
except that menu items are brought up in reverse order. Pressing
repeatedly will
backtrack to the previous menu items all the way to meter
rESEt
and return to the run
mode.
