26
Program Location 07 (PL07)
Perm Press Temp
Location to be viewed/changed.
Press “Perm Press” key.
Display will read “PP°F,” “Perm Press”
temperature key status for 3-seconds
and then actual temperature programmed.
If no change, press “Perm Press” key
otherwise press “HI” or “LO” key
and then “Perm Press” key.
Temperature Decrease
Temperature Increase
Summary: Perm Press Temp is programmable from a minimum of 100 ° F to a maximum of 190 ° F in ten-degree increments or
from a minimum of 38° C to a maximum of 88° C in five-degree increments.
PL07
PP°F
Perm Press
1
3
0F
HI Temp
Perm Press
LO Temp
Refer to Programming
Instructions for instructions on
entering program locations.
(Wait 3-Seconds)
Automatically goes into PL08 Program without PL08 Display Mode
Continued on next page
Summary of Contents for DAWS0 SERIES
Page 38: ...Part No 112999 1 xx xx 12...
