25
Program Location 06 (PL06)
LO Temp cool down temperature/time
PL06
LOCd
Perm Press
·
100
·
2
HI Temp
Perm Press
LO Temp
Refer to Programming
Instructions for instructions on
entering program locations.
(Wait 3-Seconds)
100
·
2
LO Temp
HI Temp
Perm Press
PL07
Proceed to next location
to be changed
To exit program mode,
open program switch
Location to be viewed/changed.
Press “Perm Press” key.
Display will read “LOCd,” LO Temp
cool down status for 3-seconds and then
the actual temperature and time
programmed. If no changes, press “Perm
Press” key twice, otherwise press “HI” or
“LO” key and then “Perm Press” key.
Temperature Decrease
Temperature Increase
Time Decrease
Time Increase
Summary: Cool down temperature is programmable from a minimum of 70° F to a maximum of 190° F in ten degree increments
or from a minimum of 21° C to a maximum of 88° C in five-degree increments.
Cool down is programmable from 0 to 9 minutes.
Summary of Contents for DAWS0 SERIES
Page 38: ...Part No 112999 1 xx xx 12...
