LAUNCH X-831M Wheel Aligner Installation and Parts Manual Installation and Adjustment
17
Precautions and Solutions
Common Problems and solutions
in Installation
The screen displays the prompt of “Illegal user” when
you run the software, how to handle it?
At first examine if the soft dog is installed properly or in poor
contact. Then check if the serial number and user’s
password provided are correct. If necessary, contact the
technical service section of our company for verification.
The screen displays no image when you run the
software and select “Target Monitoring”, how to handle
it?
First check if cable connection of video camera and
illumination is right and the illuminating lamp is lightened.
Secondly, check the light path. Sway a target near the
camera lens and observe if there is an image appears.
Precautions
Calibration for installation is the base of X-831M
Wheel Aligner, so every step of operations must be
performed very careful. Otherwise, test precision and
equipment usage will be affected.
After calibration for installation, the post/lateral beam
and cameras are not permitted to move and adjust.
Keep targets clean.
The filter of camera is a special optical device, so it
must be kept clean and cleaned with soft lens tissue
when dirty. Avoid crushing the filter and moving the
camera.
Summary of Contents for X-831M
Page 1: ...V1 01 000 2015 09 23...
