Launch X-831M, Installation And Parts Manual

Page: 3 / 22

LAUNCH X-831M Wheel Aligner Installation and Parts Manual
ii
Precautions

Please read the User’s Manual and the Installation
and Parts Manual carefully before operating
X-831M Wheel Aligner.
 Only the qualified technician can operate the
Wheel Aligner.
 The operator must have knowledge of computer
application and basic theory of wheel alignment.
 The power voltage of X-831M wheel aligner is of
AC220V±10% 50±1Hz / AC110V±10% 60±1Hz
（
It
can be customized according to the requirements
of customer
）
. The 3-terminal socket must be used,
and the earth terminal must be well grounded. If
the power voltage is not stable, please purchase
and use AC voltage stabilizer.

Before installing the wheel aligner, the lift should
be installed at first according to the requirements.
Regularly check the lift for fastening and leveling,
ensuring the test accuracy and personnel safety;
Take away the roadblocks around the lift to prevent
influencing operation.

Don’t install X-831M on a vibrated object or an
oblique surface. Avoid direct sunlight and moisture.

Turn off the power after operation. Check all bolts
and parts after maintenance, and tighten the
slackened bolts and parts in turn for safety.
 Since computer visual technology is used in
recognizing the targets mounted on the wheels
through the camera with high resolution, it is
necessary to keep X-831M wheel aligner away
from the outside infrared rays (e.g. sun-lights) from
directly lighting to the targets and reflecting to the
cameras. It is also necessary to avoid blocking the
light way from the targets to the cameras for a long
time during the instrument is working.

The targets of X-831M wheel aligner are the key
components for testing. Do not damage their
structures when using and storing. Keep the
surface of target clean. Please use the soft cloth
dipped with an appropriate amount of the neutral
detergent or the absolute alcohol to wipe the
surface of target lightly if there are some smuts on
it.

When using and storing, please pay much
attention to prevent water from entering into the
targets.

The wires inside the post and the lateral beam are
connected compactly. Don’t move them after first
installation.

The precision position calibration has been
performed for the cameras after first installation,
the user can not move or wobble the post or lateral
beam during or after using it.

Without approval of the supplier, please do not
disassemble the post and the lateral beam in order
to avoid damaging the components, influencing the
test accuracy and increasing the costs and
difficulties of maintenance and repair. For the
damage caused by unauthorized disassembling
will not be covered by the Warranty.

The fastening method should be selected correctly
and flexibly according to the actual conditions of
the rim, the turning force should be equal when
fastening, after fastening, please check the wheel
clamp again.
 The force should be equal when using each knob,
please don’t fasten it too tight in order to avoid
damaging the locking mechanism or other parts.

After using, please cut off all power supply timely.

The cameras of X-831M wheel aligner are the key
optical components for testing. Do not impact them
when using, keep the surface of the camera lens
clean. Please use the lens paper to wipe the
surface of the camera lens lightly if there are some
smuts on it.