LAUNCH
X-431 IMMO PAD User Manual
• Tap the input field to directly, tap
OK
. If the VIN exists on the remote server, the system will enter the diagnostic
function selection screen.
• Tap
to launch the VIN recognition module.
Place the VIN inside the viewfinder rectangle to scan it. The most recognizable location for this number is in the
top left corner on the vehicle’s dashboard. Other locations include the driver’s door or post, and the firewall under
the hood.
• Tap
to switch the display mode of the screen.
• Tap
to turn the camera flash on.
• Tap
to choose it from the record list if the VIN of the vehicle has been scanned before.
• Tap
to input the VIN manually if the tablet has failed to identify the VIN of the vehicle.
• Tap
to scan the VIN barcode. If the VIN barcode cannot be recognized, please manually input the VIN.
• Tap
to scan the VIN character. If the VIN character cannot be recognized, please manually input the VIN.
*Note: In general, vehicle identification numbers are standardized - all contain 17 characters. VIN characters may be
capital letters A through Z and numbers 1 through 0; however, the letters I, O and Q are never used in order to avoid
mistakes of misreading. No signs or spaces are allowed in the VIN.
After scanning, the screen automatically displays the result.
• If the VIN scanned is incorrect, tap the result field to modify it and then tap
OK
.
• To scan it again, tap
REPEAT
.
If the VIN exists on the remote server, the system will enter the diagnostic function selection screen.
19