LAUNCH
X-431 IMMO PAD User Manual
3 Initial Setup
3.1 Charging the Tablet
*Notes:
•
Only use the included power adaptor to recharge the tablet. Use of any other adaptor will damage the tool. We assume no
responsibility for damage or loss resulting from using other similar adaptors other than the specified one.
•
Always charge on a non-flammable surface in a well-ventilated area.
To check the battery power level, press and hold the Power button about 3 seconds to turn on the tablet. Power level
is indicated as a percentage in the upper right corner of the screen. If the power level drops below 10% while the
tablet is on, a “Connect Charger” notification will appear on the screen.
1. Charging with the included 5V power adaptor
1) Connect one end of the power adaptor to charging port of the tablet, and the other end to the AC outlet.
2) The charging LED illuminates solid red and the charging symbol
will appear on the screen.
3) Once it illuminates solid green, it indicates that the battery is fully charged and the charging complete symbol
replaces the charging symbol. Disconnect the power adaptor from the AC outlet.
2. Charging with the docking station (optional)
1) Locate the charging slot on the bottom of the tablet and docking station.
2) Align the charging slots, and then dock the tablet into the station to ensure that it is firmly seated on the docking
station.
3) Insert one end of the included power cord to the charging port of the docking station, then the other end into the
AC outlet. The charging LED illuminates solid red while charging and the charging symbol
will appear on the
screen.
4) Once it illuminates solid green, it indicates that the battery is fully charged and the charging complete symbol
replaces the charging symbol. Disconnect the power adaptor from the AC outlet.
3.2 Power On/Off
1. Press and hold the
POWER
button for about 3 seconds to turn on the tablet. The system starts initializing and then
enters the home screen.
2. To turn the tablet off, press and hold the
POWER
button until an option menu appears. Tap
Power Off
.
3.3 Screen Layout
On-screen keys and status bar are as follows:
1
Tap
to visit the official website.
2
Tap
to capture the current screen and all captured screenshots are stored in the Screenshots folder.
3
shows whether the VCI is connected properly or not.
4
Tap
to display a list of applications that are currently running or recently used. Tap certain
application to open it. Swipe it upwards to close it.
5
Tap
to jump to the home screen.
6
Tap
to return to the previous screen or exit the application.
3.4 Adjusting Screen Brightness
The tablet is equipped with a built-in light intensity sensor. It can adjust the screen brightness according to the ambient
6