LAUNCH
X-431 IMMO PAD User Manual
6.14 Suspension Calibration
1. This function can adjust the height of the body.
2. When replacing the body height sensor in the air suspension system, or control module or when the vehicle level is
incorrect, you need to perform this function to adjust the body height sensor for level calibration.
6.15 EGR Adaption
This function is used to learn the EGR (Exhaust Gas Recirculation) valve after it is cleaned or replaced.
6.16 Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic
ascending and descending function of power window.
6.17 Seats Calibration
This function is applied to match the seats with memory function that are replaced and repaired.
6.18 Tyre Reset
This function is used to set the size parameters of the modified or replaced tire.
6.10 Language Change
This function is used to change the system language of the vehicle central control panel.
6.20 A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.
6.21 Coolant Bleed
Use this function to activate the electronic water pump before venting the cooling system.
6.22 Transport Mode
In order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed,
not waking up the door opening network, and disabling the remote control key, etc. At this time, the transport mode
needs to be deactivated to restore the vehicle to normal.
6.23 AdBlue Reset (Diesel Engine Exhaust Gas Filter)
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.
6.24 NOx Sensor Reset
NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) in engine exhaust. If the NOx fault is
re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalytic converter learned value
stored in the engine ECU.
6.25 Stop/Start Reset
This function is used to open or close the automatic start-stop function via setting the hidden function in ECU (provided
that the vehicle has a hidden function and supported by hardware).
47
