![background image](http://html1.mh-extra.com/html/launch/value-601a/value-601a_use-and-instruction-manual_3915341028.webp)
SETTINGS
Working
parameter settings of the unit
Choose the accessory functions menu in
the main page.
Set current Date and Time and press ENTER
to confirm and exit the setting
Set the language to be used by the unit and
press ENTER to confirm and exit the setting
Set the desired LCD brightness/contrast
values and press ENTER to confirm and exit
the setting
Set length of the charging hoses (default is
3000 cm). NOTE: if the hose length is set to
“0” the unit will recover any gas residuals
left in the hoses to the A/C system instead
of recovering it into the unit again.
Adjust the oil viscosity value when your
unit does not have an oil scale and you
notice that the charged oil quantity to be
incorrect. Increasing the value leads to
longer valve opening times and higher oil
quantities
28
Press ENTER to display information about
the firmware version, the total and partial
recovered and charged oil and gas values.
www.diagtools.eu, [email protected], Pernavas 43A, Riga, Latvia, LV-1009, +37129416069