![background image](http://html1.mh-extra.com/html/launch/value-601a/value-601a_use-and-instruction-manual_3915341005.webp)
INSTALLATION
Installation and preparing for use
Unpacking and checking of the unit
Check the integrity of the packaging to exclude damages occurred during transport. Check the entirety of
the equipment and of the relevant accessories. Not conformities, if any, have to be pointed out immediately
and written on the transport documents.
Checking the accessories delivered with the unit
Charging hoses 3 m
HP+LP
Quick couplings
HP+LP
Feeding cable
Calibration hook
Preparing for use
Removal of the safety device
Before using, the unit for the first time remove the safety screw, which is screwed to the tank load cell for
protection (see fig. 1). It is recommended to check the regular functioning of the load cell, for example by
hooking a known weight to the bottle to check the correspondence with the weight shown on the display
(see relevant paragraph).
1
Threaded hole for transport safety blocking
screw
2
Threaded hole for the connection of the
calibration hook to the load cell
3
Load cell locking pins
Oil level checking of vacuum pump
Check the level of hydraulic oil in the vacuum pump and, if necessary, fill up to the level (about half of the
spyglass)
Medium level
5
www.diagtools.eu, [email protected], Pernavas 43A, Riga, Latvia, LV-1009, +37129416069