![background image](http://html1.mh-extra.com/html/launch/value-601a/value-601a_use-and-instruction-manual_3915341027.webp)
WEIGHTTEST
Testing procedure of the weighing scales
Choose the accessory functions menu in the
main page.
Choose WEIGHT TEST and press ENTER.
The data on the left side show the measured
weight of the sample (gas tank and oil
scales), the data on the right the analogic
and digtal values currently read.
To perform the weight test, you need a
sample weight (4 to 6 Kg for the gas tank
cell, 100-200 g for the oil scale)
or the calibration kit code ACC-CAL.
After having hooked the sample weights to
the cell, the measured data must
correspond to the sample weights.
NOTE: the above procedure is carried out to control the efficiency of the scales. In order to calibrate the scales,
please refer to the specific service instructions.
Scale calibration
kit code ACC-CAL
Hook sample
weight to the
load cell.
Gas tank scale
Oil bottles scale
27
www.diagtools.eu, [email protected], Pernavas 43A, Riga, Latvia, LV-1009, +37129416069