LAUNCH X-431IV English User’s Manual
37
4)
“Remind” function can be selected and
the reminding time can be set in the
interface. The “Remind” function will not
be available when the machine is turned
off.
5)
Click [OK] button to save and close the
Schedule New interface
5.3.4.2 View Schedule
1)
In the Schedule interface, select the date
that has been scheduled. (Refer to the
section “Add New Schedule
Set the
date of the schedule”)
2)
In the list box of the Schedule interface,
click Scrolling Bar to turn to next page,
and click the schedule you want to view.
3)
Then the contents of the schedule will be
shown in the opened Schedule View
interface.
4)
Click [OK] button to close the Schedule
View interface.
5.3.4.3 Edit Schedule
1)
In the Schedule interface, select the date
that has been scheduled. (Refer to the
section “Add New Schedule
Set the
date of the schedule”)
2)
In the list box of the Schedule interface,
click Scrolling Bar to turn to next page,
and click the schedule you want to edit.
3)
Then the contents of the schedule will be
shown in the opened Schedule View
interface.
4)
If the edited affair is ‘Daily’, ‘Weekly’,
‘Monthly’ or ‘Annual’, you can edit the
repeat time in the textbox on the bottom
of the interface.
5)
After editing, click [OK] button to save the
edited contents and close the Schedule
View interface.
5.3.4.4 Delete
Schedule
1)
In the Schedule interface, select the date
that has been scheduled. (Refer to the
section “Add New Schedule
Set the
date of the schedule”)
2)
In the list box of the Schedule interface,
click Scrolling Bar to turn to next page,
and click the schedule you want to edit.
3)
Then the schedule will be shown in the
opened Schedule View interface. See
Figure 5-31.
4)
Click [Delete] button to delete it and close
the Schedule View interface.
Figure 5-31
5.4 System
5.4.1 Control Panel
The control panel includes all interrelated
software and hardware configurations. It makes
the software more custom-built for you by
configuring.
1)
Click [Start] button.
2)
Select ‘Control Panel’ in the pop-up menu.
3)
Open the Control Panel interface. (See
Figure 5-32)