LAUMAS W200-C, Installation And User Manual

Page: 50 / 56

- 45 -
PROGRAM SELECTION: confirm  and use the arrow keys to select the desired program:

: basic program, setpoint management only.
 : to be used when the loaded weighing system correspond to not loaded cells and vice versa
(product increases while weight on load cells actually decreases).

: weight remote display program with setpoint.

: monoproduct loading program.

: monoproduct unloading program.

: 3 products batching.

: 6 products batching.

: 14 product batching.
 : no program.

Set the weight reading mode (except for

program):
-
 : the weight is received by load cells.
-

: the weight is received via serial port.

Set the approval status (only if one of the following has not been set:  ,  ,  )
-

: not approved program;
-
 : approved program, single interval (Dir. 2014/31/EU, art. 1)*;
-

: approved program, multi-interval (Dir. 2014/31/EU, art. 1)*;
-
 : approved program, multiple range (Dir. 2014/31/EU, art. 1)*;
* Contact technical assistance to request the proper manual and the correct procedures for
approval, indicating mandatory hardware code and serial number (see section
INSTRUMENT
COMMISSIONING ).

Configure the connection to the CLM serie intelligent junction box or to the multi-channel weight
transmitter (only if one of the following has not been set:

,

):
-

: intelligent junction box or transmitter connected to the instrument
-
 : no intelligent junction box or transmitter connected
By confirming, the instrument is restored to default and data is erased.
If you do not have a specific manual for the newly set program, you can request it
to technical assistance.