LAUMAS W200-C, Installation And User Manual

Page: 28 / 56

- 23 -
-
 : continuous weight transmission protocol to RIP675, RIP6125C series remote
displays; the remote display shows the net weight or gross weight according to its settings
(set:

=

,

=

,

=

).
-
 : continuous weight transmission protocol to RIP675, RIP6125C series remote
displays (set:

=

,

=

,

=

).
When the remote display is set to gross weight:
-
if the instrument displays the gross weight, the remote display shows the gross weight.
-
if the instrument shows the net weight, the remote display shows the net weight
alternated with the message

.
-
 : printer.
-

: weight reception mode (see section WEIGHT READING VIA SERIAL PORT ).
-
 : weight reception mode (see section WEIGHT READING VIA SERIAL PORT ).
-

: transmission speed (2400, 4800, 9600, 19200, 38400, 115200; default:
9600).
-

: instrument address (from 1 to 99; default: 1).
-
 : delay in milliseconds which elapses before the instrument replies (from 0
to 200 ms; default: 0).
-

:
-
 : no parity (default).
-

: even parity.
-
 : odd parity.
-

: stop bit (1 – 2; default: 1).
-

:
number of blank lines between one printout and the next
.
-
 : printing of custom heading from PC (  –  ; default:  ).
-

:
connected printer type:
-

-

-

For more information about protocols and methods of communication, request the
proper manual to technical assistance.