54 / 137
Proline Kryomats
Command
Control Variable
Open the device parameter menu with the soft
key Menu .
With the cursor keys, change further to
Control
Control Variable
.
intern
is currently active.
Select other control variables (only displayed
when present) with
or
and confirm with
or End ,
or quit the window with without making any
changes.
or
Change temperature probe source:
1
for the internal probe,
EP
only when an external probe is connected,
EA
only when an analog module is connected and configured,
ES
only when a serial module is connected and is continuously receiving
actual values from a PC.
Wait 4 seconds or
Display flashes 4 s
new value is automatically accepted, or
value is immediately accepted with Enter key.
If
EP
EA
or
ES
has been selected,
then the green
LED indicates that the control has regulated to the
external temperature signal.
Pump Menu
End
T
set
T
fix
intern
External Pt100
Analog module
Digital module
Control Variable
12!45
°C
