The following applications are considered to be non-intended:
n
in potentially explosive areas
n
for tempering foodstuffs
n
with a glass reactor without overpressure protection
1.3
Foreseeable misuse
Misuse of the device must always be prevented.
Among other things, the following uses are considered to be foreseeable
misuse:
n
Operation of the device without heat transfer liquid
n
Incorrect connection of hoses
n
Setting the device up on a tabletop surface, only permitted for MC 250
and MC 350
n
Setting an incorrect pump pressure
1.4
EMC requirements
Table 1: Classification in accordance with EMC requirements
Device
Immunity requirements
Emissions class
Customer power supply
Microcool
Table 2 (Industrial) in accord-
ance with DIN EN 61326-1
Emissions Class B
in accordance with CISPR 11
Only for EU
Domestic connection value
³
100 A
Microcool
Table 2 (Industrial) in accord-
ance with DIN EN 61326-1
Emissions Class B
in accordance with CISPR 11
Rest of the world (outside EU)
No limitation
"This equipment has been tested and found to comply with the limits for
Class A digital device, pursuant to Part 15 of the FCC (Federal Communica-
tion Commission) Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the
interference at his own expense."
“This Class A digital apparatus complies with Canadian ICES-003” (ICES =
Interference Causing Equipment Standards).
« Cet appareil numérique de la classe A est conforme à la norme NMB-003
du Canada ».
1.5
Prohibition of modifications to the device
Any technical modification of the device by the user is prohibited. Any
damage resulting from unauthorized modification is not covered by customer
service or the product warranty. Service work may only be performed by the
LAUDA Service department or a service partner authorized by LAUDA.
Non-intended use
Instructions for Class A digital device, USA
Instructions for Class A digital device,
Canada
V07
Microcool
7 / 57
