CAUTION!
Automatic device start with the auto start timer
Cold burns, danger of injury, device damage
Before using the auto start timer, ensure that all prepara-
tory measures for intended use have been implemented!
1.
Select the menu item for specifying auto start.
2.
Press the input button to confirm.
3.
Specifies the time period after which the device is to be switched on
again.
If auto shutdown has not been configured for the device, the
device is switched directly to standby when you confirm.
Wait approx. 4 seconds if you do not wish to accept the
specified value. The display will automatically return to the
basic display.
4.
Press the input button to confirm.
The value must be confirmed within 4 seconds of the last
entry. Otherwise, the display will return to the basic display.
1.
Select the menu item for auto shutdown or auto start.
2.
Press the input button to confirm.
The remaining time period is displayed.
3.
The following options are available:
n
Wait approx. 4 seconds if you only wish to display the remaining
time period. The basic display is shown again.
n
Set the time period accordingly to edit the remaining time period.
Press the input button to confirm.
1.
Select the menu item for auto shutdown or auto start.
2.
Enter 00.00.
3.
Press the input button to confirm.
The value must be confirmed within 4 seconds of the last
entry. Otherwise, the display will return to the basic display.
Configuring auto start
Fig. 18: Auto start
Viewing and editing the remaining time
period
Resetting
V07
Microcool
36 / 57
