CAUTION!
Risk of external hydraulic circuit bursting due to gage pressure
Impacts, cutting, cold burns
When laying the hoses, make sure they cannot kink.
Please note the following:
n
Temperature control hoses: Always use the largest possible diameters
and shortest possible hoses in the external circuit.
If the temperature control hose diameter is too narrow, the insufficient
flow rate will cause a drop in temperature between the device and
the external consuming unit. In this case, increase or decrease the
temperature accordingly.
n
Secure the temperature control hoses using hose clips.
n
When external consuming units are positioned higher than the device,
the external volume may run dry when the pump is switched off and air
enters the external fluid circuit, even when the circuits are closed. There
is then a danger that the device will overflow.
n
If a hose breaks, cold liquid may leak out, thereby endangering people
and materials.
V07
Microcool
25 / 57
