P A Y C L O C K & P C 6 0 0 U S E R ’ S G U I D E
82
Appendix C - Connecting the PC600
Directly to the Computer’s NIC
This document describes the steps to configure PC600 terminal to
communicate with the PayClock database server when connecting
directly into the computer’s wired NIC. This would be used when the
user doesn’t have a network setup and has a computer that has a
wired NIC.
Step #1 - At the Computer where PayClock is installed
See the More Information section for Windows XP, Vista and
Windows 7 directions for accessing the NIC properties.
•
Open the Properties of the NIC.
•
Open the Properties of the Internet Protocol item.
•
Define the IP (10.0.1.1) and Subnet Mask (255.0.0.0).
Step #2 - Connect the Ethernet cable to the computer and
PC600
•
The computer will go through the process of acquiring the IP
connection.
Step #3 - At the PC600 terminal
•
Access the Administrator Main Menu.
•
Press the Network Setup button.
•
Set the DHCP to Off.
•
Enter the IP address (using the computer’s IP as reference,
i.e. 10.0.1.2).
•
Enter the Subnet Mask (same as what was entered at the pc,
i.e. 255.0.0.0).
•
Leave the Gateway at the default (0.0.0.0).
•
Press the Define Host button.
Summary of Contents for PC600 Series
Page 1: ...Model PC600 User s Guide...
