P A Y C L O C K & P C 6 0 0 U S E R ’ S G U I D E
68
Date and Time
This area is used to send the time to the terminal, set the terminals
time zone, enable/disable DST, choose the hour display format and
select the terminal’s time source.
Set Terminal Date and Time
: Click the Set button to send the
time and date to the terminal.
Time Zone:
From the list select the time zone that the terminal
will use. The default setting is Eastern Time.
Daylight Saving Time:
Select whether DST will be turned On or
Off. The default setting is On.
Time Format:
Select whether the hours will display as 12-hour
(AM/PM) or 24-Hour (0-23) on the terminal. The default setting is
12-Hour.
Time Source:
Select whether the terminal will get its time from the
internet (NIST) or from the PayClock server computer. The default
setting is NIST.
General Settings - Supported Validation Types
This area is used to configure the terminal to accept PIN entry,
Badge entry or both. The default is to have both enabled.
PIN Entry
: Select this option if you wish employees to be able to
use the “Clock In/Out” function on the touch-panel of the
terminal. Note: Employees will not be able to enter their PIN if this
option is unchecked.
Badge Entry
: Select this option if you wish employees to be able
to present a badge and badge In/Out on the terminal. Note: The
badge reader will be disabled if this option is unchecked.
Password - Admin Password
This password is used to access the Admin functions on the terminal.
The default password is 99999. Note: Only one admin is available on
the PC600 terminal.
Summary of Contents for PC600 Series
Page 1: ...Model PC600 User s Guide...
