P A Y C L O C K & P C 6 0 0 U S E R ’ S G U I D E
77
PC600 WAN Installation
•
At the remote site install mount and connect the PC600
terminal to the network.
•
With the PC600 powered up and connected to the network,
press the Admin button and enter the administrator PIN
(99999).
•
The Administrator Main Menu will display. Press the
Network Setup button.
•
The Network Setup screen will display. If using a “static” IP
address at the terminal select
DHCP
=
Off
. Set the
terminal’s IP, Subnet Mask and Gateway addresses. If you are
using DHCP select
DHCP
=
On
. The IP, Subnet Mask and
Gateway Address will automatically be set when the DHCP
setting is On.
•
Press the
Define Host
button, the Define Host screen will
display.
•
Press the
Host IP
button and enter the IP Address for the
computer where the PayClock database server resides and
press
OK
.
Note:
Use the Server Summary or Connection Info print out for
the PayClock database server’s IP address.
•
Under Live Sync press the
Enable
button, the Sync Now
button will display.
•
Press the
Sync Now
button, the screen will turn orange with
“Downloading Latest Data From Host. Please Wait…”.
•
When finished verify the connection.
•
Press the Admin button and enter the administrator PIN
(99999).
Summary of Contents for PC600 Series
Page 1: ...Model PC600 User s Guide...
