P A Y C L O C K & P C 6 0 0 U S E R ’ S G U I D E
66
When a PC600 terminal hears the broadcast it responds and allows
you to add the terminal to PayClock.
1.
From the Ribbon Bar click the Terminal Manager tab and click
on the Find Terminals button. The Terminal Discovery window
will display.
2.
When the PC600 is detected the terminal’s IP address, serial
number and terminal type will display.
3.
Highlight the terminal in the list and click the Create button. The
terminal will be added to the Terminals list.
4.
You are now ready to configure the terminal.
Connection tab - PC600 Terminal
The Connection tab displays the selected terminals ID, name and IP
address read from the terminal and the PayClock server. To access
the Device ID on the PC600, log in as the Admin at the PC600 and
select the Device Information button. You can also assign a name to
the terminal; this can be useful if you have more than one terminal.
Activate Live Sync by checking the option and updating the terminal.
Device ID
: Displays the PC600’s internal ID. (View only)
Device Nickname:
Allows you to assign a name/identifier to the
PC600 terminal.
Device IP Address:
Enter the IP address for the PC600.
Server IP Address:
Enter the IP address of the computer where
the PayClock server resides.
Live Sync Enabled:
Select whether to enable the live sync option
on the terminal.
Note:
It is not recommended to enable the live
sync option if you are using a wireless network card on the
computer where the PayClock server is running because some
wireless network cards do not keep a constant network connection.
Update Interval Check:
Select how often the terminal will
check to see if there are any changes in the software that
require an update of the terminal.
Summary of Contents for PC600 Series
Page 1: ...Model PC600 User s Guide...
