Chipper LS 160T
24
The safety frame
for material loading serves
as an actuator for loading rolls control.
Its operating positions, as seen from the
attendant’s place:
- MATERIAL LOADING – initial position
- EMERGENCY STOP – while pushing the
frame
The control buttons for loading and rolls
reversing.
By pressing the green button set the loading
rolls in motion for chipping or anytime after
putting the machine out of operation or after
emergency stop caused by pushing the safety
frame.
By pressing the yellow button set the loading
rolls in reverse motion. This button can be
used also for rolls inching at reversation (while
being pushed).
Loading speed regulation
This actuator is installed under the loading
chute and can regulate the roll speed within the
range of 0 – 40 m/min
Emergency STOP button
blocks loading
immediately – similar function as that of the
safety frame.
Summary of Contents for LS 160
