Chipper LS 160T
15
Motor Vehicle Construction and Use Regulations
1.
This machine is allowed to be coupled to a tractor provided that actual weight
of the tractor in such an attachment does not exceed its maximum permissible
value and its actual front axle load does not fall under 20% of its gross weight.
2.
At public road transport the machine rear must be completed with a portable
set of rear lamps and reflector glasses supplied by the manufacturer.
3.
Under conditions of very low visibility any public road transport is not
allowed.
4.
Any public road transport without this portable set of rear lamps and reflector
glasses is not allowed – these lamps must always be turned on.
5.
This portable set should comprise:
-
2 plates with red-white hatching with reflecting surface
-
2 rear combined lamps with side, stop and direction indicator lights
-
2 rear triangular red reflector glasses
-
1 warning triangle for marking of slow-moving vehicles
Should the tractor speed be higher than 40 km/h, then the warning triangle for
slow-moving vehicles is unnecessary.
Summary of Contents for LS 160
