Laski LS 160, Operating Instructions Manual

Page: 16 / 55

Chipper LS 160T
16
6. The distance between the outer edge of lamps and reflector glasses in the
portable set and the contour line of the vehicle should not exceed 400 mm.
7. At public road transport this machine must be lifted up in its transport
position, see instructions in this manual.
8. The transport position means that the machine is lifted up; clearance height
under its bottom should be approximately 300 – 400 mm; the PTO drive is
turned off; the turnable discharge duct is folded down and mechanically
blocked; the hinged part of the loading chute is lifted up and mechanically
blocked; all the portable lamps are plugged in the tractor 7-pin socket.
9. While working on public roads, the amber light on the tractor cab must be
turned on.
10. The max. permissible speed of the machine for transport on public roads is not
explicitly specified – a valid value, see the max. permissible speed as specified
for the given tractor.
11. Should the max. speed sign on the tractor be covered by the coupled machine,
then it should be attached to the left plate on the machine rear.
12. Always before coming to a public road it is necessary to remove all mud,
especially from the tractor tires and accumulated sediments from the machine.
13. At public road transport the driver must keep the utmost diligence due to the
fact that the rear part of the coupled machine swings out while manoeuvring.
14. At public road transport the tractor driver must keep also all local regulations
valid for public roads.