Manual: Purelight PL-16.000RGB / PL-31.000RGB
page 9 / 30
7. Safety Presets
By default there are following safety presets in the device:
- Scan fail safety (accord. IEC 60825-3):
active
-
beam
block
safety inactive
- ILDA-Interlock processing (pins 7 + 14)
active
The safety options can be adjusted at the scanner board. Please see the manuals on
Laserworld‘s website for details.
8. Turn off
To turn off the device disconnect the power cable from the mains.
Important Note:
Operate scanners/galvos only at appropriate speed according to the res-
pective scan angle. Too high scan speed can damage the scanning system.
