Section 6 - Target Modes
Page 19
During the Vertical Missing Line Routine:
•
Press
to re-shoot Shot 1.
•
Press
to exit the Missing Line Routine.
1.
Select your first target and look through the
eyepiece, using the crosshair to aim to your target.
The
indicator displays steady and the
indicator flashes; prompting you to measure the
Horizontal Distance to the first target.
2.
Press-and-hold
. The
indicator is displayed
while the laser is active. The laser remains active
for a maximum of 5 seconds while acquiring data
about the target. The measured horizontal distance
appears in the Main Display.
3.
Once the
button is released, "SHot2" appears
steady and the
indicator flashes (with
steady); prompting you to measure the Horizontal
Distance to the second target. Looking through the
eyepiece and using the crosshair to aim to the
second target.
4.
Press-and-hold
. The
indicator is displayed
while the laser is active. The laser remains active
for a maximum of 5 seconds while acquiring data
about the target. The measured horizontal distance
to the second target appears in the Main Display.
5.
Once you release
,
and
are steady
and the calculated horizontal distance of the
missing line is displayed. The measurement
displays steady until you press any button or the
unit powers off.
At this time, you can:
•
Press
or
to scroll and see the other missing line
measurements results (
,
and
).
•
Reshoot Shot 2 by pressing
or
until Shot 2 and ML
appear steady
in the display as well as HD flashing, prompting you to measure
the horizontal
distance to the second target (or new target). Go to #4 above.
•
Press
to exit the missing line results and return to Shot 1.
Figure #14
