Laser Technology, Inc. TruPulse 200L User's Manual 1
st
Edition
Page 6
Section 2 - Quick Start
1.
Install the batteries
.
2.
Press
to power ON the TruPulse 200L.
3.
Select a target such as a tree or a building. For this
example, the target should be approximately 250 feet
(82 yards or 75 meters) from you.
4.
Look through the eyepiece (see Figure #2) and use the
crosshair to aim to the target. The in-scope LCD should
look similar to Figure #3A.
o
If the
indicator is not displayed, press
or
until the
indicator is
displayed.
5.
Press-and-hold
. The
indicator is
displayed while the laser is active (Figure #3B).
The laser will remain active for a maximum of
5 seconds while acquiring data about the target.
o
If the target is not acquired, release
and repeat this step.
6.
Release
once the distance is displayed
(Figure #3C). The measurement will be
displayed steady until you press a button
or the unit powers OFF.
o
Press
or
to scroll through the
measurement modes and see the results
acquired for each function.
o
Repeat steps #3-#6 above to take another
measurement.
o
Simultaneously press-and-hold
and
for 4 seconds to power OFF the
TruPulse 200L.
Figure #2
Figure #3
