Section 6 - Target Modes
Page 15
Slope Distance
Inclination
Horizontal Distance
Vertical Distance
Height Routine
Section 4 - Measurement Modes
When you power ON the TruPulse 200L, the last used Measurement Mode will be active.
Press
or
to display the previous or next Measurement Mode. Figure #11 shows
the five different types of measurements that the TruPulse 200L can take.
Distance Measurements
The basic steps for taking any distance measurement:
1.
Look through the eyepiece and use the crosshair to aim to the target.
2.
Press-and-hold
. The
indicator is displayed while the laser is active. The
laser will remain active for a maximum of 5 seconds while acquiring data about the
target.
o
If the target is not acquired in the 5 second period, release
and
repeat this step.
3.
Once the measurement is displayed, release
. The measurement will be
displayed steady until you press any button or the unit powers OFF.
Figure #11
