Section 6 - Target Modes
Page 17
Height Routine
Height Measurements involve a
simple routine that prompts you
to take 3 shots to the target:
Horizontal Distance, Inclination
Angle base and Inclination Angle top.
The TruPulse 200L uses these results
to calculate the height of the target.
Figure #12 shows the three shots
required for the height routine.
1.
Select your target and look through the eyepiece, using the
crosshair to aim to your target. The
indicator displays
steady and the
indicator flashes; prompting you to
measure the Horizontal Distance to the “face” of the
target.
2.
Press-and-hold
. The
indicator is displayed while
the laser is active. The laser will remain active for a
maximum of 5 seconds while acquiring data about the
target. The measured horizontal distance appears briefly in
the Main Display and then Ang_1 appears, and the
indicator flashes; prompting you to measure the inclination
to base (or top) of the target.
3.
Press-and-hold
and aim to the base (or top) of the
target. The measured inclination appears in the Main
Display and is updated as long as us you continue to hold
. The measured inclination is “locked” when you
release
. The measured inclination appears briefly in
the Main Display and then Ang_2 appears and the
indicator flashes; prompting you to measure the inclination
to the top (or base) of the target.
Figure #13
A
= Horizontal Distance
B
= Top Angle
C
= Base Angle
D
= Height
Figure #12
